Product

NeuroTrac® MyoPlus Pro

New and Improved touch-screen with full colour display. The new user friendly interface makes it a self-explanatory unit with the interactive learning on the go, including electrode placement, running EMG graph as well as many other helpful tools

  • The new user friendly touch screen based interface makes it a self-explanatory unit with interactive learning on the go, including electrode placement, running EMG graph, EMG biofeedback Games and Templates as well as many other helpful tools.
  • Pre-set programmes for Incontinence treatment (including a special programme for the treatment of incontinence by stimulating the nervous tibialis posterior with self-adhesive electrodes) and neuro-muscular Rehabilitation.
  • Supplied with Rubber sleeve with stand and lanyard attachment option.
  • Designed for Physiotherapist in mind to be used as a portable tool. Suitable as a personal trainer for in-clinic or home use (under guidance).
  • Single channel EMG (Biofeedback) combined with 1 channel of NMES (stimulation).
  • Single channel ETS (EMG triggered stimulation) with single channel stimulation.
  • Simple single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme.
  • Multilingual full color display screen and voice prompts for Biofeedback.
  • Manual and Automatic threshold control.
  • EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).
  • Stand alone device or used in conjunction with established multilingual software.
  • Up to 10 meters of wireless connection for NeuroTrac Software.
  • For home users: Produces and prints (with the optional PC Software) the comprehensive patient progress reports on a day to day basis providing average readings on work/rest, peak, onset and muscle release times, work and rest deviations and the average mA current.
  • Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and Neuromuscular stimulation.

Model number: MYO120P. This product is available through selected distributors who are able to provide training and support.

  1. 1. EMG
    1. 1.0 Single channel EMG
    2. 1.1 EMG Range: 0.2 to 2000 μV RMS (continuous)
    3. 1.2 Sensitivity: 0.l μV RMS
    4. 1.3 Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz
    5. 1.4 Selectable Bandpass filter – 3db Bandwidth,
      1. a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% – Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% – Reading above 235 microvolts
      2. b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%
    6. 1.5 Notch filter: 50 Hz (Canada 60Hz) – 33 dbs (0. 1% accuracy)
    7. 1.6 Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
    8. 1.7 Work / Rest periods: 2-99 seconds
    9. 1.8 Number of Trials: 2-99
  2. 2. NMES, TENS and ETS
    1. 2.1 Single channel Stimulator
    2. 2.2 Amplitude: 0-90 mA into 500 Ohm load – actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 86 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
    3. 2.3 Type: Constant current, maximum output voltage 180 Volts +10 / -30 Volts
    4. 2.4 Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current
    5. 2.5 Pulse width selection: 50-450 μS in predefined, 50-330μS in custom (10% accuracy)
    6. 2.6 Pulse rate selection: 2-100 Hz (5% accuracy)
    7. 2.7 Work / Rest periods: 2-99 seconds
    8. 2.8 Time 1 – 99 minutes
    9. 2.9 Ramp up time: 0.1 – 9.9 seconds
    10. 2.10 Preset and user programmable treatment Programs
    11. 2.11 Automatic output shut off with detection of open electrode above 10 mA (+/- 2mA).

Battery:
Battery set: 4 x 1.5V, AAA battery.
Low battery indication at 4.2-4.4 volts +/- 0.2 volts, automatic shut off when voltage drops below the low indication. Replace the batteries immediately!
The device goes off automatically when not in use (energy saving): for example when in settings and no key is pressed over 1 minute when in stimulation mode (home screen) and all channels are 0mA.

Expected average battery set life [of standard 850 mAh, alkaline]:
14-18 hours in STIM, 28 hours in EMG mode.

Expected service life:
5 years. Careful use and maintenance extend the life of the unit over the service life limit.

Environmental Conditions for use:
+5 to +40 degrees Centigrade. 15-90% Humidity.

Environmental conditions for storage & transport:
-25 to +70 degrees Centigrade. 15-90% Humidity.

Physical:
Dimensions: Length 150 mm, Width 89 mm, Depth 35 mm.
Weight: MyoPlus Pro device: 140g (without batteries).

post(overview)

Electrodes Placement Manual

Please download the electrode Placement Manual in your chosen language:

View Details
Stress & Urge incontinence
Swallowing rehabilitation (dysphagia)
Company
Services
Legal

© All rights reserved. Created with Voxel